Sold Out $306.90
Meter can cooperate with 2, 5, 10, 20, 50, 100, 400, bar sensor; new calibration is not necessary when changing sensors
Select from the various bar sensor options when changing pressure sensors, previous settings will be saved through EEPROM
Can provide accurate pressure measurement for the following units: bar, psi, kg/cm2, mm/Hg, inch/Hg, meter/H20, inch/H20, atmospheric pressure
Optional full line pressure sensor (2,5,10,20,50,100,400 bar) are available.
4 pin DIN socket, 2 pins to provide DC 5V power to the pressure transducer.
Zero button on the front panel to easily adjust the zero value the pressure sensor.
Calibration options available.
Large 61 mm x 34 mm LCD display for easy reading.
Data hold function, can retrieve maximum and minimum readings through the recall function.
RS 232 PC serial interface.
Dimensions: 180 x 72 x 32 mm
Range : 2, 5, 10, 20, 50, 100, 400 BAR.
Output : 4 to 20 mA DC.;4 mA = 0 pressure; 20 mA = full scale pressure
2 wires, both for signal and power supply.
Precision ceramic type pressure sensor.
External zero and span adjustment.
Allow high cable load resistance, transmitter to be installed far away from the controller/indicator.
Protection for the reverse wires connecting.
Compatible with the 4-20 mA Controller/Alarm/Indicator CT-2012 and functions as a pressure controller
Allows remote monitoring and control by the user
The Dwyer® Series 475 Mark III Handheld Digital Manometer is ideal for field calibration, monitoring or trouble shooting HVAC systems, clean rooms or a wide range of other low pressure pneumatic systems.
This handy instrument measures positive, negative or differential pressures of air and natural gases in ranges from 1" w.c. (0.249 kPa) to 150 psid (10.34 bar). The Series 475-FM is approved and is intrinsically safe for hazardous locations, Class 1, Div.1, Group A, B,C, D, T4. Its simple operation and easy to read digital display make it an indispensable test instrument for the plant engineer, industrial hygienist and HVAC technician.
When used with a Dwyer® Pitot tube, the Series 475 Mark III can also be used as an air velocity gauge.
•Monitoring or trouble shooting HVAC systems.
•Clean room checks.
•Air velocity monitoring with Dwyer Pitot tube.
•Natural gas appliance line pressure.