Measure everything from temperature to tyre pressure from moisture to light.
Sold Out $34.95
The Smartphone Geiger Sensor Plug allows users to use their smart phones to measure radiation coming out from a radioactive substance in dose-rate figure (uSv/h) and sound an alarm at a preset level.
By using a free downloadable APP for your iOS® and Android® device, you can see real time measurements or trigger an alarm when a pre-determined measurement is reached. Intended for domestic use and readings, should only be used as a guide.
Specifications:
• Measurements: Gamma, X-ray
• Measuring range: 0.1-200μSv/h
• Measurement error: < ±15%
• Operating temperature: 10-40°C
Sold Out
A handy, easy-to-use and accurate luggage scale to help monitor the weight of your luggage for your trips abroad. Weight capacity of 40 kg, ideal for weighting luggage or other similar objects.
Specifications:
• Capacity: 40kg
• Backlit LCD
• Datahold function
• Tare and auto-off
• Overload and low battery indication
• Size: 122(L) x 85(H) x 25(W)mm
Sold Out
An advanced thermometer/hygrometer capable of measuring indoor and outdoor temperature, as well as relative humidity. The large easy to read LCD acts as a receiver unit for a separate outdoor sensor unit. It will record max and minimum temperatures for quick referral and conveniently displays the time of day. Ideal for temperature or humidity sensitive environments such as museums, greenhouses, or to check if your home and office is too dry or moisture laden. The LCD receiver unit is capable of receiving information from up to 3 sensor units, which are available separately (see part no XC-0324)
Specifications:
• Indoor temperature range: 0 ~ +60°C
• Remote temperature range: -45 ~ +65°C
• Temperature accuracy: +/-1.0°C
• Humidity range: 1% to 99%
• Transmission frequency: 433.92MHz
• Transmission range: Up to 100m open air
• Power requirements (receiver): 2 x AA alkaline batteries (not included)
• Power requirement (remote): 2 x AAA alkaline batteries (not included)
• Receiver dimensions: 95(H) x 114(W) x 25(D)mm
• Sensor dimensions: 51(H) x 63(W) x 25(D)mm
$129.00 $240.90
Sold Out
Functions:
2 in 1 (3 phase rotation tester and motion rotation field tester)
3 Phase Rotation Tester: To display the phase sequence of 3 phase power system
Motor Rotation Field tester: To make the determination the rotation field of unconnected motor
Specifications:
Power Supply: 006P DC 9 V battery
Consumption: Motor rotation field tester : 14 mA
Circuit Structure: Electronic
Size: 50 x 85 x 40 mm ( 5.9 x 3.4 x 1.6 inch )
Weight: 230g/0.5 LB ( w/o battery )
Accessories included: 1x Operation Manual, 3x Rubber alligator clip with banana pulug (red/white/black wire)
Sold Out $669.90
Features:
The Digital Stroboscope uses a microprocessor circuit design to ensure accurate measurement and quality performance.
Ideal for measuring and inspecting the speed of moving gears, fans, centrifuges, pumps, motors and other equipment.
Suitable for general industrial maintenance, production, quality control, laboratories, schools and colleges.
Equipped with a digital synthesis circuit for high stability, high resolution and easy operation.
Crystal time based to ensure accurate measurements and rapid measuring time.
Uses a high intensity, xenon flash tube with plug and socket for easy tube replacement.
Wide range: 60 to 32,000 RPM
Adjustment resolution: 0.1 RPM (<1,000 RPM), 1 RPM ( >1,000 RPM).
5 digit LCD display
Dimension: 21 x 12 x 12 cm (8.3 x 4.8 x 4.8 inches)
Sold Out
Sold Out
Features:
High precision magnetometer
DC/AC milligauss Magnetometer
Equipped with high sensitivity sensor for high precision magnetic field measurement
General magnetometer for industrial, mechanical, material, electrical, and laboratory industries
DC and AC magnetic field measurement
Wide measure range: ± 3,000 milligauss
The meter can detect the magnetic fields as small as 0.1 milligauss
Pole indicator for North and South poles
Separate probe for easy operation and remote measurement.
Zero adjustment button for relative measurement.
Microprocessor circuit assures maximum possible accuracy, special functions and features.
Digital reading with large LCD (13 mm).
Separate pin type moisture probe for easy operation adn remote measurement
Data hold function
Auto-shut off function to conserve battery life
RS 232/USB PC serial interface
Heavy duty and compact housing
Sold Out
Features:
Multifunction for insulation measurement of 200 Megohm (100V), 200 Megohm (250V), 200 Megohm (500V), 2000 Megohm (1000V)
Digital display for easy readout
Build-in ACV and OHM measurement function
Precision 200ohm range; ideal for measuring low resistance such as motor windings, relay coils, etc.
Insulation measurement with high drive current, > 2.55 mA
large LCD (18 mm) display.
Built-in over-input and low battery detection
Overload protection for each range
Battery operated, DC 9V (6 x 1.5V AA battery,recommended to use the alkaline or heavy duty battery
Sold Out $691.90
Features :
The digital stroboscope is equipped with a microprocessor circuit design to ensure high accuracy and quality performance. Microprocessor circuit is ideal in measuring the speed of moving gears, fans, centrifuges, pumps, motors and other equipment
Stroboscope use high intensity XENON tube.
LCD display with back light.
Stroboscope range : 100 to 10,000 RPM.
External trigger for stroboscope.
Photo tachometer range : 10 to 99,999 RPM.
Photo tachometer use the laser light beam.
DCV power supply via external AC/DC adapter included
Sold Out
Replacement Vane propeller for Anemometers for Anemometer - AM4201 and Anemometer With Temperature - AM4202
Sold Out
Features:
Auto-range and multi-function for insulation measurement
Wide measurement range: 4/40/400/4000 MΩ ( 100 V, 250 V, 500 V, 1000 V ).
Insulation measurement with auto discharge function, safety.
Build in the ACV & DCV & OHMS measurement function.
Precision 400 ohm & 4000 ohm auto-range for measuring low resistance.
A continuity beeper is equipped in OHM range.
Built with LSI-circuit to ensure high reliability and durability.
Data Hold function.
Automatic zero adjustment and automatic circuit discharge.
Large 77 x 49 LCD screen
Lock & Test functions offer worker's safety and easy operation.
Overload protection for each range.
RS-232 computer interface.
Powered by AA DC 1.5V X 8 batteries.
Specifications:
Power consumption
Approx. 112 mA (100M ohm/1000V range).
Approx. 70 mA (100 M ohm/500V range).
Approx. 58 mA (100 M ohm/250V range).
Approx. 53 mA (100 M ohm/100V range).
Approx. 18 mA ( ACV range).
Approx. 18 mA ( DCV range).
Approx. 65 mA (0 ohm/OHM range).
Meg Ohm (Insulation)
Range: 4/40/400/4000 M ohm
Resolution: 1 K/10 K/0.1 M/1 M ohm
Accuracy: ± ( 3% + 5d)
Ohms
Range: 400/4000 ohm
Resolution: 0.1/1 ohm
Accuracy: ± ( 1% + 2d)
DC Voltage
Range: 600 DCV
Resolution: 0.1 DCV
Accuracy: ± ( 1.5% + 2d)
Input impedance: 10 M ohm
AC Voltage
Range: 600 ACV
Accuracy: ± ( 1.5% + 2d)
Resolution: 0.1 ACV
Input Impedance: 10 M ohm
Sold Out
Ideal for beach combing and prospecting as well as finding objects in obscured locations such as long grass, this high grade portable metal detector is suitable for many applications.
Capable of detecting a 10 cent coin at up to 150mm depth it will detect a variety of metals including iron, nickel, gold, brass, zinc, copper, silver, and aluminium. With an adjustable length boom, forearm brace, and padded handle, the comfort and balance is excellent resulting in minimal effort during use.
Metal detection in indicated on the LCD screen which shows both the type of metal and depth of reading. An audio tone is also activated on the built-in speaker with varying pitch to indicate the type of metal. A 3.5mm headphone socket is also available for headphone use.
Features:
• Controller Dimensions: 145(W) x 125(L) x 86(H)mm
• Overall Length: 1080 to 1300mm
• Search Coil Dimensions: 205(Dia) x 20(H)mm
• Requires 6 x AA Batteries (not included)
Sold Out
Ideal for beachcombing and prospecting as well as finding objects in obscured locations such as long grass, this high grade portable metal detector is suitable for many applications.
Capable of detecting a coin at up to 180mm depth it will detect a variety of metals, with three different tones to distinguish dissimilar metals. Operating at a low frequency of 6.6 kHz, the detector will only respond to metal objects and ignores the effects of iron ground mineralization, making it more accurate for locating at large depths.
Alternatively, the all-metal mode can be switched on to enable any underground metal traces detected and is signaled both optically and acoustically. An extra large waterproof pick-up coil with its intricate two-dimensional helical winding technology enables very fine and precise measurements to be carried out while carrying it comfortably with the arm support.
Features:
• Adjustable sensitivity
• Deep target searching
• 3 Operation modes: All metal, Disc, Notch
• Ferrous/Non-ferrous indicators
• Waterproof search coil
• Large LCD
• 3 Tones for different metal indication
• One touch auto ground balance
• Headphone jack
• DSC and GND adjustment
• Arm Support
• 2” Speaker
Specifications:
• Power: Requires 2 x 9V batteries
• Overall Length: 1250mm
• Search Coil Dimensions: 205(Dia.) mm
Sold Out
Sold Out $60.45
Smartphone Ultraviolet Sensor Plug-in allows users to use their smart phones to measure UV index and power and sound an alarm at a preset level.
By using a free downloadable APP for your iOS® and Android® device, you can see real time measurements or trigger an alarm when a pre-determined measurement is reached. Intended for domestic use and readings, should only be used as a guide.
Specifications:
• Measurements: UV (Ultraviolet)
• Range: 240 - 380nm
• Detects: UVA, UVB
• UVI (UV Index) range: 0 - 12
• UV Power: 0 - 6mW/cm2
• Measurement error: ± 10%
• Workable temperature: -20 - 50°C
• Workable humidity: < 80%
• Sensor type: Semiconductor sensor
• Dimensions: 30(L) x 10(Dia.)mm, 6g
Sold Out $60.45
Smartphone Electromagnetic Sensor Plug-in Module allows users to use their smart phones to measure electromagnetic waves around on your Smartphone in V/m (Volt/Metre) in real time.
By using a free downloadable APP for your iOS® and Android® device, you can see real time measurements or trigger an alarm when a pre-determined measurement is reached. Intended for domestic use and readings, should only be used as a guide.
Specifications:
• Measurements: Electromagnetic field (EMF)
• Minimum response: 1V/m
• Range: 1 - 2,000V/m
• Frequency: 16Hz - 100kHz
• Dimensions: 30(L) x 10(Dia.)mm, 6g
Sold Out
$1,001.00
Features:
• The galvanic electrode can be used immediately after being powered on without the wait time typically associated with dissolved oxygen meters.
• With a simple calibration process, quick delivery of measurements and automatic temperature compensation, Starter 300D is both easy-to-use and accurate.
• The automatic or manual endpoints allow the user to easily recall the last calibration data and stored information with one quick touch.
Sold Out
$435.00
The Dwyer® Series 475 Mark III Handheld Digital Manometer is ideal for field calibration, monitoring or trouble shooting HVAC systems, clean rooms or a wide range of other low pressure pneumatic systems.
This handy instrument measures positive, negative or differential pressures of air and natural gases in ranges from 1" w.c. (0.249 kPa) to 150 psid (10.34 bar). The Series 475-FM is approved and is intrinsically safe for hazardous locations, Class 1, Div.1, Group A, B,C, D, T4. Its simple operation and easy to read digital display make it an indispensable test instrument for the plant engineer, industrial hygienist and HVAC technician.
When used with a Dwyer® Pitot tube, the Series 475 Mark III can also be used as an air velocity gauge.
Product Applications
•Field calibration.
•Monitoring or trouble shooting HVAC systems.
•Clean room checks.
•Air velocity monitoring with Dwyer Pitot tube.
•Natural gas appliance line pressure.
Sold Out
$179.00
This is a high quality, all metal frame construction magnifier which features 90 super bright LEDs inside the magnifier head. The magnifier itself is made of glass and is a 3 dioptre lens, with a metal handle for quick re-positioning.
Features:
• 3 dioptre magnification
• Lens size: 120mm
• Light source: 90 LEDs
• Mains powered
• Total extended length 900 mm
$179.55 $189.00
A USB microscope with a simple but incredibly useful stand that allows you to make fine adjustments to the vertical height of the microscope and swivel the scope arm around a 360 degree range. This permits a greater level of viewing accuracy and stability. The microscope can be easily removed for the stand for situations which demand it. On either side of the stand there are two metal holders to lock your object in place and a printed ruler to help you get an approximate feel for the length of objects. The optics built into this microscope are excellent. The sharpness of texture on magnified objects is incredible to look at you will spend hours searching for things to magnify (check out a full resolution 5MP capture on our website).
Features:
• Image sensor: 5MP
• Focus range: Manual focus from 10mm to 150mm
• Snap shot: Button or software
• Shutter speed: 1 sec to 1/1000 sec
• Still image resolution: 2592x1944, 2048x1536, 1600x1200, 1280x960 pixels
• Video capture resolution: 1280x960
• Flicker control: 50Hz/60Hz
• Light source: 8 x LEDs with adjustable brightness
• Magnification ratio: 10x, 300x (at 5MP res)
• Power source: USB
• Compatible with WinXP/Vista/7/8, Mac 10.6-10.8
• Bundled software: Microcapture Pro with measurement function
• Dimensions:
- Microscope: 110(L) x 33(Dia)mm,
- Stand: 165(H) x 165(L) x118(W)mm
$83.00
$248.00
The 799 Electronic Caliper is light, comfortable, easy-to-use, and constructed with features that have made Starrett slide calipers the machinist's first choice for many years.
The 799 offers a slim, streamlined profile, a large, clear, easy-to-read LCD display, long battery life, and function buttons for zero and inch/mm.
All sizes furnished in a fitted, protective case.
Features
• Lightweight, ergonomic design
• Inch/millimeter conversion reads .0005" or 0.01mm
• Easy access to the single, long-life battery
• Last measuring position retained when shut off
• Hardened stainless steel body for long life
• Fine adjustment thumb wheel
• Lock screw to hold the slide in position
• Resolution is .0005" (0.01mm)
• Zero at any position
• Large easy-to-read LCD, .32" high characters
• Automatic shut-off after 5 minutes of nonuse
• Linear accuracy meets DIN862
• Integrated depth rod
Subscribe to our newsletter and always be the first to hear about what is happening.
© 2017 Electric Burst.
